VN.S20 ESW

230 Vac gear motor with encoder, quick release and 1/20 reduction rates

Category: VN.S20 ESW
ENQUIRE NOW
  • 230 Vac
  • Up to 35 ㎡
  • Industrial use
  • Sectional doors and rolling doors
  • Oil lubricated motors guarantee the maximum lifespan and high performances

230 Vac

Up to 35 ㎡

Industrial use

Sectional doors and rolling doors

Oil lubricated motors guarantee the maximum lifespan and high performances

VN.S20 ESW

230 Vac
230 Vac gear motor with encoder, quick release and 1/20 reduction rates | New plastic box that makes wiring the motor easier, thanks to the position of the front clip connector and the possibility of reaching three different positions with the wiring | Equipped with absolute encoder that permits the regulation of the positions of the opening and closing limit switches on the door directly from the control unit | Quick plug-in connection for quick and easy installation | Two accessories are available for chain drives with gear speed reduction rates 1:1 (off-axis motor installation) or 1:1.8 (torque or speed multipliers) | Maximum safety guaranteed during rapid release phases, thanks to a micro-switch that cuts the power supply to the motor | Oil lubricated reductions with hardened steel screw and bronze gears guarantee high performance, maximum reliability and silent operation

THINKY

THINKY

APPLICATION
1 actuator for sectional doors and rolling doors, folding doors with more than two sections, unbalanced shutters and industrial sliding gates
CONTROL UNIT POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MOTORS POWER SUPPLY
230 Vac single-phase or 400 Vac three-phase
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with ARC and predesigned for plug-in radio receiver | Predesigned for connection to absolute encoder and quick wiring (VN “ESW” motors) | Autosetting of operating parameters with motors equipped with absolute encoder (VN “ESW” motors) | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Open, close, step by step, pedestrian and stop inputs | Inputs for 4 pairs of photocells (configurable as active in opening-closing or in closing phases) and equipped with PHOTO TEST logic | Input for N.C or 8K2 sensitive edge | Input for safety sensor | Output configurable as gate open indicator, second radio channel, service light and area light | Output configurable as gate open indicator or photocell testing output | Protection against phase failure and exceeding motor current threshold | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

230 Vac
230 Vac
400 Vac | three phase
400 Vac | three phase
433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
64 transmitters storable inside the receiver
64 transmitters storable inside the receiver
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
This is used to set the number of cycles after which the required maintenance of the system is signaled
This is used to set the number of cycles after which the required maintenance of the system is signaled
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
WAVE 230

WAVE 230

APPLICATION
1 actuator of the VN series for sectional and rolling doors
CONTROL UNIT POWER SUPPLY
100÷250 Vac – 50/60 Hz
MOTORS POWER SUPPLY
230 Vac
MAIN FUNCTIONS
Integrated LCD display | ONE2.WI model 433.92 MHz radio receiver provided as standard equipment | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Predesigned for connection to absolute encoder and quick wiring (VN “ESW” motors) | Autosetting of operating parameters | Open, close, step by step, pedestrian and stop inputs | Input for N.C or 8K2 sensitive edge | Input for safety sensor | no. 2 photocell inputs configurable as active in opening-closing or in closing phases | Output configurable as gate open indicator, service light, area light | Photocell testing ouput | Second radio channel output | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric obstacle detection | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Integrated inverter | Virtual encoder | Number of maneuvers | Programming access password | Maintenance warning

230 Vac
230 Vac
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
512 transmitters storable inside the receiver
512 transmitters storable inside the receiver
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
This is used to set the number of cycles after which the required maintenance of the system is signaled
This is used to set the number of cycles after which the required maintenance of the system is signaled
The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety
The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety
Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety
VN.S20 ESW | Automations for garage & industrial doors | Automatismi Benincà