JM.4ESA

24 VDC GEAR MOTOR FOR INTENSIVE USE, WITH INTEGRATED CONTROL UNIT AND ENCODER

Category: JM.4ESA
ENQUIRE NOW
  • Up to 11 ㎡
  • 24 Vdc
  • 64 transmitters storable inside the receiver
  • Commercial use
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • Residential use
  • Sectional garage doors
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

Up to 11 ㎡

24 Vdc

64 transmitters storable inside the receiver

Commercial use

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

Residential use

Sectional garage doors

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

JM.4ESA

24 Vdc | intensive use
24 Vdc gear motor for intensive use, with integrated control unit and encoder | Adjustable stroke with one mechanical stop included in the belt rails and two in the chain rails | Anti-crushing system with amperometric obstacle detection | Operation guaranteed even in the event of a power supply failure through batteries that integrate perfectly into the motor | Evolved electronics with display and energy saving courtesy light | The encoder guarantees maximum safety and precision while the gate is moving | Quick hooking system for connecting the arm to the door plate
Rail not include

CP.J4ESA

CP.J4ESA

APPLICATION
1 actuator series JM.3ESA, JM.4ESA
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Integrated ESA SYSTEM for energy savings | Fixed terminal boards | Automatic and semi-automatic logic | Step by step, open, close, stop and photocell inputs | Input for N.C or 8K2 sensitive edge | Output for configuration as gate open indicator, service light, second radio channel or area light | Photocell testing | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric detection and encoder management | Possibility of setting a slower starting speed for 2 seconds (SOFT START) | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
64 transmitters storable inside the receiver
64 transmitters storable inside the receiver
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
This is used to set the number of cycles after which the required maintenance of the system is signaled
This is used to set the number of cycles after which the required maintenance of the system is signaled
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
Technical Drawing JM.4ESA