JM.3ESA
24 VDC GEAR MOTOR FOR INTENSIVE USE, WITH INTEGRATED CONTROL UNIT AND ENCODER
Up to 11 ㎡
24 Vdc
64 transmitters storable inside the receiver
Commercial use
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
Residential use
Sectional garage doors
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
JM.3ESA
24 Vdc | intensive use
24 Vdc gear motor for intensive use, with integrated control unit and encoder | Adjustable stroke with one mechanical stop included in the belt rails and two in the chain rails | Anti-crushing system with amperometric obstacle detection | Operation guaranteed even in the event of a power supply failure through batteries that integrate perfectly into the motor | Evolved electronics with display and energy saving courtesy light | The encoder guarantees maximum safety and precision while the gate is moving | Quick hooking system for connecting the arm to the door plate
Rail not include
CP.J3-SW
APPLICATION
1 operator for JM.3 sectional garage doors
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Regulation of operating parameters and logics through trimmers, dip-switches and buttons | Integrated 433.92 MHz 64-code radio receiver with ARC coding | Fixed terminal blocks | Automatic, semi-automatic and deadman logic | Step by step, stop and photocell inputs | Integrated LED courtesy light | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crushing safety through amperometric detection and encoder management | Electronic regulation on 4 levels of residual tension of the belt at the end of the manoeuvre | Adjustable slow-downs | Integrated ESA SYSTEM+ for energy saving | Advantouch system to configure parameters and manage radio transmitters | Set up for connection to SW.CB battery charger (optional) | Set up for connection to KNX systems via X.BE card (optional) | Designed for managing, configuring, diagnosing and updating firmware through the BeUP app, using the PRO.UP accessory
CP.J4ESA
APPLICATION
1 actuator series JM.3ESA, JM.4ESA
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Integrated ESA SYSTEM for energy savings | Fixed terminal boards | Automatic and semi-automatic logic | Step by step, open, close, stop and photocell inputs | Input for N.C or 8K2 sensitive edge | Output for configuration as gate open indicator, service light, second radio channel or area light | Photocell testing | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric detection and encoder management | Possibility of setting a slower starting speed for 2 seconds (SOFT START) | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning
