JACK24.50

24 VDC GEAR MOTOR FOR SIDE MOUNTING FOR INTENSIVE USE, WITH INTEGRATED CONTROL UNIT AND ENCODER

  • Up to 20 ㎡
  • 24 Vdc
  • 433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
  • The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands
  • 512 transmitters storable inside the receiver
  • Commercial use
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • Integrated device that ensures a standby absorption of less than 0.5 W
  • Industrial use
  • This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)
  • Sectional garage doors
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

Up to 20 ㎡

24 Vdc

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands

512 transmitters storable inside the receiver

Commercial use

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

Integrated device that ensures a standby absorption of less than 0.5 W

Industrial use

This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)

Sectional garage doors

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

JACK24.50

24 Vdc | intensive use
24 Vdc gear motor for side mounting for intensive use, with integrated control unit and encoder | Switching power supply 115/230 Vac which reduces energy consumption and ensures a long lifespan of the actuator | The control unit, easily accessible thanks to the front cover with hinges, is equipped with an innovative system (ESA+) to reduce the energy consumption, which guarantees an absorption in standby below <0.5 W | Equipped with a service light with 14 built-in LED lights that guarantee a high light output | Compact size (11 cm width) that allows a quick and easy mounting even in limited spaces | Ideal for the automation of large doors (up to 20 ㎡) or if an intensive use is required | The encoder guarantees the highest safety and precision during the movement of the door | Built-in STC system for a precise torque management | Operation guaranteed even in the event of a power failure thanks to batteries that can be perfectly integrated in the motor (2 batteries 1.2 Ah) | Anti-crushing system with amperometric obstacle detection | Designed for the connection of the X.BE accessory in order to be integrated with KNX domotics installations and the programming through the app BeUP and the interface PRO.UP | Built-in fast release system
Fixing plate included