CP.JACK

Category: CP.JACK
ENQUIRE NOW
  • 433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
  • This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
  • The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands
  • 512 transmitters storable inside the receiver
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • Integrated device that ensures a standby absorption of less than 0.5 W
  • This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)
  • This is used to set the number of cycles after which the required maintenance of the system is signaled
  • Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
  • This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands

512 transmitters storable inside the receiver

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

Integrated device that ensures a standby absorption of less than 0.5 W

This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)

This is used to set the number of cycles after which the required maintenance of the system is signaled

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

CP.JACK

APPLICATION
1 lateral operator for JACK24 balanced sectional doors
CONTROL UNIT POWER SUPPLY
100÷250 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD Display | Integrated 433.92 MHz 512-code radio receiver with ARC coding | Removable terminal blocks | Absolute Encoder | Automatic, semi-automatic and deadman logic | Step by step, stop, photocell, open and close inputs| Input for N.C or 8K2 sensitive edge | Integrated LED courtesy light | Output for configuration as gate open indicator, service light, second radio channel or area light | Output for 24 Vdc electric lock management | Autosetting of operation parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crushing safety through amperometric detection and encoder management | Electronic slowdowns in opening and closing | Integrated ESA SYSTEM+ for energy saving | Set up for connection to KNX systems via X.BE card (optional) | Designed for managing, configuring, diagnosing and updating firmware through the BeUP app, using the PRO.UP accessory | Advantouch system to configure parameters and manage radio transmitters | Number of manoeuvres | Programming access password | Maintenance warning | Built-in battery charger