CP.J3-SW

Category: CP.J3-SW
ENQUIRE NOW
  • 433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
  • This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
  • The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands
  • 64 transmitters storable inside the receiver
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • Integrated device that ensures a standby absorption of less than 0.5 W
  • This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)
  • Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

The control panel can be managed thanks to BeUP app, which recreates the control panel menu to adjust parameters and logic, and read error messages and update the firmware. You can do remote diagnostics, check the status of the gate and send commands

64 transmitters storable inside the receiver

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

Integrated device that ensures a standby absorption of less than 0.5 W

This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

CP.J3-SW

APPLICATION
1 operator for JM.3 sectional garage doors
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Regulation of operating parameters and logics through trimmers, dip-switches and buttons | Integrated 433.92 MHz 64-code radio receiver with ARC coding | Fixed terminal blocks | Automatic, semi-automatic and deadman logic | Step by step, stop and photocell inputs | Integrated LED courtesy light | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Separate electronic adjustments of opening and closing speeds | Anti-crushing safety through amperometric detection and encoder management | Electronic regulation on 4 levels of residual tension of the belt at the end of the manoeuvre | Adjustable slow-downs | Integrated ESA SYSTEM+ for energy saving | Advantouch system to configure parameters and manage radio transmitters | Set up for connection to SW.CB battery charger (optional) | Set up for connection to KNX systems via X.BE card (optional) | Designed for managing, configuring, diagnosing and updating firmware through the BeUP app, using the PRO.UP accessory