CP.CORE
24 Vdc
64 transmitters storable inside the receiver
Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
This is used to set the number of cycles after which the required maintenance of the system is signaled
Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
CP.CORE
APPLICATION
1 actuator of the series BULL5M for sliding gates
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
230 Vac
MAIN FUNCTIONS
Parameter and operation logic regulations through trimmers and dip-switches | Integrated 433.92 MHz 64-code radio receiver with ARC coding | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Encoder (MAG.E) output for detecting obstacles | Motor limit switch inputs | Step by step, pedestrian and stop inputs | Step by step input configurable as open | Stop input configurable as close or pedestrian | Photocell input programmable as active in opening-closing and in closing phases | Output as gate open indicator | Autosetting of operation and slow-down parameters | Adjustable slow-downs | Electronic torque adjustment for motor on 5 levels | Possibility to manage radio transmitters memorised on integrated receiver with Advantouch system
