CP.B24 TURBO

Category: CP.B24 TURBO
ENQUIRE NOW
  • 24 Vdc
  • 64 transmitters storable inside the receiver
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • This is used to set the number of cycles after which the required maintenance of the system is signaled
  • Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner
  • This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

24 Vdc

64 transmitters storable inside the receiver

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

This is used to set the number of cycles after which the required maintenance of the system is signaled

Compatibility with Advantouch device. The system allows a simplified management of transmitters and receivers, with the possibility of managing lists by deleting or storing transmitters in an easy and quick manner

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

CP.B24 TURBO

APPLICATION
1 actuator for sliding gates, series BULL624/1224 TURBO
CONTROL UNIT POWER SUPPLY
115 or 230 Vac (selectable) 50/60Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 512-code radio receiver with ARC coding | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Step by step, open, close and stop inputs | Photocell input (PHO) configurable as active in opening-closing or only in closing phases | Photocell input (PHC) active both in opening and closing phases | Input for N.C or 8K2 sensitive edge | Input for safety sensor | OPEN input configurable as pedestrian | Two outputs configurable as gate open indicator, second radio channel of the incorporated receiver, service light, photocell testing | Predesigned for the operation of opposed sliding gates through SIS synchronisation board (optional) | Predesigned for KNX connection through X.BE board (optional) | Autosetting of operating parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric obstacle detection | Virtual encoder | Adjustable slow-downs | Advantouch system to configure parameters and manage radio transmitters | Number of maneuvers | Programming access password | Maintenance warning | Integrated battery charger, compatible with battery models DA.BT2/DA.BT6

Terminal Diagram HEADY24