BULL1224 TURBO

FAST 24 VDC GEAR MOTOR FOR INTENSIVE USE WITH INTEGRATED CONTROL UNIT AND VIRTUAL ENCODER

Category: BULL1224 TURBO
  • Up to 1200 kg
  • 24 Vdc
  • Maximum maneuver speed is 24 m/min
  • 433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)
  • 512 transmitters storable inside the receiver
  • Commercial use
  • This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)
  • Oil lubricated motors guarantee the maximum lifespan and high performances
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
  • Gear motor with opening speed higher than standard values
  • Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety

Up to 1200 kg

24 Vdc

Maximum maneuver speed is 24 m/min

433.92 MHz Receiver equipped exclusively with Advanced Rolling Code (ARC)

512 transmitters storable inside the receiver

Commercial use

This is a protocol for connection with KNX home automation systems by connection of the X.BE card (optional)

Oil lubricated motors guarantee the maximum lifespan and high performances

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

Gear motor with opening speed higher than standard values

Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety

BULL1224 TURBO

24 Vdc | intensive use
Fast 24 Vdc gear motor for intensive use with integrated control unit and virtual encoder | Switching power supply 115/230 Vac which reduces energy consumption and ensures a long lifespan of the actuator | The main control unit, on the top part of the motor, makes it possible to facilitate the wiring procedure and also to calculate the position of the motor starting from the measurement of instantaneous speed (virtual encoder) | The virtual encoder allows proper management of the slowing-down phases, movement tracking (STC system), and torque management in relation to the position of the gate, which guarantees maximum safety | Self-programming with transmitter can be activated at the first installation | Practical cableguides | Maximum performance and speed (24 m/min with 1200 kg) | Anti-crushing system with amperometric obstacle detection | Safety sensor that stops the motor power supply during release operations | Designed for connection to the X.BE module to integrate the device into KNX home automation systems | Convenient compartment for 2 mod. DA.BT6 7 Ah batteries | Metal release lever | Option to operate opposed sliding gates using the SIS accessory
Foundation plate with anchor bolts included. Motor and floor fixing distance 269×106 mm n.4 Ø 12 mm