BULL17 OMI
230 VAC GEAR MOTOR FOR INTENSIVE USE WITH INTEGRATED CONTROL UNIT, VIRTUAL ENCODER AND INVERTER
Up to 1700 kg
230 Vac
512 transmitters storable inside the receiver
Industrial use
The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety
Oil lubricated motors guarantee the maximum lifespan and high performances
Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance
Encoder signal recreated by the control unit beginning with the measurements of electric motor operation parameters. It is possible to manage slowing optimally and trace gate travel while providing the torque data in relation to its position to guarantee maximum safety
BULL17 OMI
230 Vac
230 Vac gear motor for intensive use with integrated control unit, virtual encoder and inverter | The main control unit, located in the top part of the motor and with integrated inverter, makes it possible to calculate the position of the motor starting from the measurement of current intensity on the electric motor (virtual encoder) | The inverter technology allows the speed of the motor to be gradually varied, during both acceleration and deceleration, as well as guaranteeing a more precise adjustment of the gate movement phases and a greater anti-crushing safety | Oil lubrication guarantees maximum duration of the reducer. The type of oil is very effective and guarantees excellent performance even at low temperatures | Reduced mechanical wear of components | The virtual encoder allows proper management of the slowing-down phases, movement tracking (STC system), and torque management in relation to the position of the gate, which guarantees maximum safety | Adjustable speed from 10 to 24 m/min according to gate weight | Safety sensor that stops the motor power supply during release operations | Receiver ONE.2WI is supplied | Metal release lever
Foundation plate with anchor bolts included. Motor and floor fixing distance 269×106 mm n.4 Ø 12 mm
CP.BULL OMI
APPLICATION
1 actuator for sliding gates, series PONY
CONTROL UNIT POWER SUPPLY
230 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Integrated ESA SYSTEM for energy savings | Coloured fixed terminal boards | Automatic and semi-automatic logic | Motor limit switch inputs | Step by step and stop inputs | Programmable photocell inputs active in opening-closing or only in closing phases | Photocell testing | Autosetting of operation parameters | Electronic torque adjustment | Anti-crushing safety thanks to amperometric detection | Adjustable slow-downs | Option of setting pedestrian opening from radio transmitters
