CP.EVA

APPLICATION
1 road barrier series EVA.5, EVA.7, EVA.8
CONTROL UNIT POWER SUPPLY
100÷250 Vac – 50/60 Hz
MOTORS POWER SUPPLY
24 Vdc
MAIN FUNCTIONS
Integrated LCD display | Integrated 433.92 MHz 64-code radio receiver with 3 encoding systems (Advanced Rolling Code, Rolling Code, Fixed Code) | Absolute encoder management | Removable terminal boards | Automatic, semi-automatic and deadman’s logic | Motor limit switch inputs | Open, close, step by step, photocell and stop inputs | Output for EVA.L accessory, integrated LED on arm | Output configurable as open barrier indicator light, second radio channel of incorporated receiver, arm light, service light, photocell test or maintenance indicator | Predesigned for the operation of opposed barriers with SIS synchronisation board (optional) | Autosetting of operation parameters | Electronic torque adjustment with automatic calculation for each point in the stroke (STC SYSTEM) | Anti-crushing safety thanks to amperometric obstacle detection | Adjustable slow-downs | Number of maneuvers | Programming access password | Maintenance warning | Integrated battery charger, compatible with battery models DA.BT2/DA.BT6

Category: CP.EVA
ENQUIRE NOW
  • This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations
  • 64 transmitters storable inside the receiver
  • Control unit that manages the encoder for maximum precision during the automation manoeuvring steps
  • This is used to set the number of cycles after which the required maintenance of the system is signaled
  • This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters
  • Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

This function automatically adjusts the operational parameters for simplifying the system’s installation and testing operations

64 transmitters storable inside the receiver

Control unit that manages the encoder for maximum precision during the automation manoeuvring steps

This is used to set the number of cycles after which the required maintenance of the system is signaled

This allows a code to be entered for protection of the control unit programming, to prevent access to menus and modification of parameters

Intelligent power control system that allows obtaining dynamic data through a precise calculation of the thrust. The system is able to locate any critical points and adjust the torque accordingly in relation to actual requirements and according to measured performance

CP.EVA